How Can I Check If I Have A Leak?
Checking and locating a leak in the water pipes or other plumbing parts are easy only when they are visible to your eyes. For example, you can see a crack in the shower arm which can cause water to leak over time. However, if this same crack was present in the water supply line hidden behind the drywall, you won’t be able to know whether the leak has actual existence or not.
Below in this article, we have discussed how you can detect a water leak in the pipes or any other plumbing hardware system. This will help you call for repair service immediately and prevent any further damage like corrosion, widening cracks, decreasing pipe strength, and so on.
Check the water level meter.
The first way to check whether you have a water leak or not is via the water level meter readings. For this, you need to turn off the water supply to your home and then the appliances which use water. Also, make sure that no tap, shower, or any other outlet is functional. Once everything is shut down, check the reading of the water level meter and record it.
Wait for five to ten minutes, and if the reading changes, it means you have a large leak. If the value is not changing, wait for about an hour or two and check the meter again. A changed water level reading will indicate a small or very thin crack through which water is leaking slowly.
Check the water consumption and bills.
The second way to detect a leak is by checking the water consumed and the monthly bills. You will have an approximate idea about how much water you have consumed in a month, including drinking water, bathing water, the water used in gardening, and so on.
You can manually calculate the bill according to your approximate water consumption value to know how much you have to pay. Then, when you receive the actual bill, compare both these amounts, and if to-be-paid money is much more than your calculation depicted, you have a water leak.
Check the toilet
In any house, one of the main areas where water leak happens too often is in the toilet’s plumbing system. To check for the leak, you can add a dye to the tank’s water and then wait for a couple of minutes. If the water in the bowl has the same color as the dye you used, it means that there is a leak in your toilet.
Conclusion
In the above article, we have discussed the three major ways to check for a leak in your domestic plumbing system. Using any method, you will have an idea about the leak and how much water is seeping through it. Hence, you will know whether you need to call for a plumbing repair service or not.